The ``Slip Head Jig'' exhibits an amazing ability to avoid obstacles, even in scree fields strewn with various rocks, fishing reefs, and branches intertwined with each other that make you hesitate.The head and hook are connected with a split ring. This is a joint type rubber jig that allows you to bring the big bass hiding in the cover to bite without interfering with the original action of the trailer.
Even if you get stuck, the head shape that is good at slipping through, the line eye position, and the side eye will allow you to get through the cover with a high probability, so you can mass-produce bites by keeping cast without breaking the rhythm.
■Head design & horizontal eye
A low center of gravity head with high obstacle avoidance ability that won't tip over unnecessarily.
The eye setting uses the principle of leverage to overcome bumps even if you get stuck, giving the angler a feeling of slipping through so much that they don't even feel like they're stuck.
The two ribs on the bottom have a high sensing ability that transmits the terrain to the rod, allowing you to trace the bottom.
The horizontal eye that keeps the line binding part in a fixed position prevents the knot from slipping and enables stable action.
■Joint & Hook (Size: 1/8oz・3/16oz=#2/0, 3/8oz・1/2oz=#3/0)
The default is the Gamakatsu hook “LD Master” with a large line eye diameter. This increases the range of motion of the trailer worm and increases its appeal to bass. It also allows you to bite smoothly without causing any discomfort. It is connected to the head with a split ring, so if the hook point becomes dull or you want to match it to the size of your trailer, you can replace it with your own hook.