Zap Zap Quick Set Epoxy

Pacer ZAP Quick Set Epoxy: Professional 5-Minute Epoxy Resin

The Pacer ZAP (JMC) Quick Set Epoxy is a standard in the world of modeling and quick repairs. It is the classic two-component epoxy glue designed to provide structural hold in a short time. This premium two-component adhesive is a must-have for every angler. It offers endless applications: from rod building and repair to the intricate art of fly tying. Its strength and precision make it the perfect ally for your fishing gear maintenance.

Main Features

• Setting Time: Approximately 5 minutes. This is the time it takes to become solid, but it is not yet at maximum strength.

• Full Cure: It is necessary to wait 24 hours for maximum mechanical hold.

• Finish: Dries clear (with a slight tendency to amber over time).

• Materials: Ideal for wood, ceramic, metals, glass, and almost all plastics.

Tips for a Perfect Result

To prevent the glue from remaining sticky or not holding, follow these steps:

1. 1:1 Mixing: It is essential to mix exactly equal parts of resin and hardener. If proportions are wrong, the resin may never dry completely.

2. Surface Preparation: Epoxy adheres better to rough surfaces. Use fine sandpaper and clean with alcohol to remove traces of grease or dust.

3. Execution Speed: Once mixed, you have about 3 minutes to position the pieces. After that, the glue will start to become "stringy" and will no longer bond well.

Important Warnings

• Cap Caution: Never swap the caps of the two bottles! If you put the resin-stained cap on the hardener bottle, you will permanently seal the package.

• Odor: It has a pungent odor (similar to sulfur) during the chemical reaction. We recommend working in a well-ventilated area.

Buy now fly fishing rods, fly reels, fly lines and accessories at www.bassstoreitaly.com, the largest fishing store in Europe with over 50,000 items available.